Multiple RFID readers access control system

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

 Hi,
   It's a very interesting project , we are looking for.

   In normal solution for RFID project , 

   It's one Device (PC) call API control one RFID reader (1:1) under serial port.

   sometimes, one RFID use a switch to control multiple antennas.

   but U need 1 PC in 1 reader physical  point, so 10 points need 10 PCs control 10 readers. 

   I think U need a wireless device control multiple readers.

   some concept share U,  

   Firstly,  The serial port limit the Distance, so need replace serial with 

   ethernet(TCP/IP) mode in  reader. 

   Than, U can connect the reader anywhere  under network (include wireless).

   Secondly,  One Device(PC) control multiple Readers, it's anther issue.

   thus, we develop API and Middle-ware App support multiple reader operation. 

   finally, the control Device (PC) is too expensive, 

   we develop an wireless(wifi) embedded device (ARM/MIPS CPU) replace the PC.

    So, U can use some wireless devices support very large amount readers situation at low cost.     

  and,  use Network Management system monitor 
  your devices and readers reliable is another ideal.

   FYI

Best Regards,

George

Edited by georgew9 - 25 April 2010 at 1:04am

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
georgew9 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 25 April 2010 Status: Offline Points: 1	Post Options Post Reply Quote georgew9 Report Post Thanks(0) Quote Reply Posted: 25 April 2010 at 1:02am
	Hi, It's a very interesting project , we are looking for. In normal solution for RFID project , It's one Device (PC) call API control one RFID reader (1:1) under serial port. sometimes, one RFID use a switch to control multiple antennas. but U need 1 PC in 1 reader physical point, so 10 points need 10 PCs control 10 readers. I think U need a wireless device control multiple readers. some concept share U, Firstly, The serial port limit the Distance, so need replace serial with ethernet(TCP/IP) mode in reader. Than, U can connect the reader anywhere under network (include wireless). Secondly, One Device(PC) control multiple Readers, it's anther issue. thus, we develop API and Middle-ware App support multiple reader operation. finally, the control Device (PC) is too expensive, we develop an wireless(wifi) embedded device (ARM/MIPS CPU) replace the PC. So, U can use some wireless devices support very large amount readers situation at low cost. and, use Network Management system monitor your devices and readers reliable is another ideal. FYI Best Regards, George Edited by georgew9 - 25 April 2010 at 1:04am